SKF QuickCollect CMDT 390 - Page 24

4 - 6 QuickCollect
User Manual
 Below the THRESHOLDS field, tap to select the units of measurement system that
you wish to use for all measurements: Metric or Imperial.
Figure 4 – 6.
Settings table, scrolled to bottom.
 Tap the Support field to start an email to IT Services for the purpose of obtaining
support for an application issue.
 Tap the Feedback field to start an email to IT Services for the purpose of providing
application feedback.
 Tap the Legal information field to review QuickCollect terms and conditions
(including warranty disclaimer and limitation of liability, copyright, trademarks and
patents, and change in information), privacy policy, ownership information and
more.
 Tap Reset settings to reset all Settings configurations to their defaults.
 Tap Done to return to the home screen.