Date: 2022-09-26 Page 45 of 48
Operation and Installation CD401MR-SC
DIAG menu CODE page
A multi repeater CD401MR can be converted to CD401MB by entering a code. Code
is available using the CODE page in the DIAG menu. On this menu, the serial number
is displayed, and the new code can be purchased from the SKIPPER retailer.
Code to be entered into the CODE page by using the arrow buttons.
Please note that the cabling is dierent for repeaters and speed logs, so it is not
possible to convert a repeater to EML224 or DL1 display without replacing the back
plate.
NOTE: It is important to note that pay option codes are unique for each individual unit
and will not work on other units.
To Next Page
Loading...