Skipper SB-100-SB - 5. Assembling Extension Tube and Sensor

Page11 of 22
Date: 12.08.2020
5. ASSEMBLING OF EXTENSION TUBE AND SENSOR
Sensor type with 11mm cable diameter:
• Echo sounders:
• ETN050G, ETN050XG,
ETN200SG, ETN200SXG
• Speed logs:
• DL2SG-SA, DL21SG-SA,
DL850S27G-SB, EML224SDB-SD,
DL1SDB-SA
2
1
5
4
?
3
Assembled view
POS. PART NR. DESCRIPTION QTY.
1 ETS50200-SA Transducer 50/200kHz in 100mm housing w/25m cable 1
2
DB-2039 Nut M28 Brass 1
3
DB-2026 Extension Tube 0,5m SB-100 1
4
DB-2020 Gasket Ø25,9x15 ø8 2
5 DB-2019
Washer Brass Ø25,9 ø9 x2,5mm
4
C
2 3 1 4
B
A
D
E
F
Approved by - date
ST 2018.05.11
Designed by - date
1 of 2
50200kHz Transducer for 100mm
Sea Valve w/25m cable
Scale
ETS50200G-SA
Revision
00
Sheet
Edition date
GT 2018.05.11
Name
Drwg. no.
CN
All sharp edges to be
broke or deburred
2018.05.11
Material
N/A
Eur. projection Gen. tolerance
ISO2768m
Electronics AS
Sensor type with 7mm cable diameter:
• Echo sounders:
• ETS50200G-SA, ETS50200XG-SA.
(Item numbers below)
NOTE: Gaskets and washers are supplied as part of Speed log sensors/Echo sounder transducers
SKIPPER Electronics AS
SB-100-XX Operation and Installation Manual