Page12 of 22
Date: 12.08.2020
6. SENSOR INSTALLATION
• Place the O-ring, Item (36) in the groove on top of the intermediate element, Item (7).
• Apply grease to the O-ring.
• Insert the 2 thread bolts, Item (11) through the ange and secure with 2 x M16 counter nuts, Item (28).
• Torque 130 Nm.
• Lower the sensor housing carefully down to the top of the valve piston.
SKIPPER Electronics AS
SB-100-XX Operation and Installation Manual
To Next Page
Loading...
