Skipper SB-100-SB - 7. Clamp Unit Mounting

Page13 of 22
Date: 12.08.2020
7. CLAMP UNIT MOUNTING
Clamp Unit mounting
Mount Top Flange, Item (8). Secure with 8 washers, Item (29) and nuts, Item (28). Torque: 130 Nm.
Mount in following order:
• 2 x gasket, Item (12).
• Washer, Item (17).
• Nut M50, Item (13).
• 2 x M16 nuts, Item (28 ).
• Clamp Unit, Item (10).
• 2 x M16 nuts, Item (28) with spring washer, Item (29).
SKIPPER Electronics AS
SB-100-XX Operation and Installation Manual