Skipper SB-100-SB - Page 5

Page5 of 22
Date: 12.08.2020
Important
”Sensors for Speed Log and Echo Sounder are delivered with a xed cable. Attention must be taken
to allow easy replacement/pulling of new cable during maintenance”.
SKIPPER Electronics AS will recommend installation positions if GA-drawings (General
arrangements), lines drawings and frame drawings are made available for study.
Condition.
The welding to hull structures and structural support of the items may be subject to separate approval by
classication societies for each installation on board a ship.
Note: All “Item numbers” references on the following pages, can be found on drawing “Illustrated parts list.
Assembled” (unless specied).
SKIPPER Electronics AS
SB-100-XX Operation and Installation Manual