sks BSV2012 - Signalling and Terminals; Signalling Indicators; Terminal Designation; Connection Diagram

SKS-Kinkel Elektronik GmbH
10006901 BSV2012 Video indoor station hands-free
EN
Support Hotline: +49 (0) 2661 98088-112
Support E-Mail: support@sks-kinkel.de
Version No. 2.0
Document No. 97010703
40
4 Signalling
LED 1: Optical signalling of calls
LED 2: Signalling of mute mode
LED 3: Key touch recognized
5 Terminal designation
Terminal Designation
a+/b- BUS terminals
E+/E- Floor bell button
V+/V- Video signal
+22/GND Voltage supply
5.1 Connection
The indoor station is connected to the 6W video BUS using termi-
nals a+/b-.
Terminals E+/E- can optionally be connected to a oor bell button
(normally open contact).
The video signal for the 6-wire video BUS is on terminals V+/V-.
Via terminals +22/GND the BSV2012 indoor station free-hands is
supplied with 20-28 VDC.
To avoid mistakes when connecting the indoor station please
use the SKS planning guide or wiring plan.