55
Support Hotline: +49 (0) 2661 98088-112
Support E-Mail: support@sks-kinkel.de
Version No. 2.0
Document No. 97010703
SKS-Kinkel Elektronik GmbH
10006901 BSV2012 Video indoor station hands-free
EN
8.9 vReset to default
Open the housing.
Lever the left plastic plug with terminals a+/b-/E+/E- out of its holder
using a screwdriver.
+ v
Keep hold of the programming key at the back of the device while re-
connecting the BUS by plugging the terminals E-/E+/b-/a (from left to
right) onto the four contacts on the right.
Keep hold of the programming key until you hear a signal tone, show-
ing that the reset has been successful.
All settings are now back to default, all call addresses and internal call
addresses are deleted.
KLICK
After that remove terminals a+/b-/E+/E- from the contacts and remount
it to its holder. By pushing the plug down it clicks into place.
To Next Page
Loading...
