sks BSV2012 - Calling Other Stations Internally

49
Support Hotline: +49 (0) 2661 98088-112
Support E-Mail: support@sks-kinkel.de
Version No. 2.0
Document No. 97010703
SKS-Kinkel Elektronik GmbH
10006901 BSV2012 Video indoor station hands-free
EN
8.4.3 Internal call addresses that are called by the indoor station
To be able to call other indoor stations in the same system (internal or group call) their internal call addresses have
to be programmed into one of the six storage places for internal call addresses in the indoor station. To do so
follow these steps:
Step Description
1
If unsure whether any or which internal call address-
es have already been programmed pick the menu
point → Setup → Internal call to check which in-
ternal call addresses have been programmed in the
device.
As default no internal call addresses are pro-
grammed.
2
Choose the indoor station‘s menu point → Setup →
Internal call → New.
3
Set a rst internal call address (= 1st storage
space, called in the menu call no: 1) using the arrow
keys, this is called when internal call 1 is initiated.
Each internal call address consists of one letter (A to
H) and a number (1 to 12).
4 To program further internal call addresses repeat steps 2 and 3.
No more than six internal call addresses can be saved in the device.
Attention
If an internal call address is assigned to a storage space (1 to 6) that was assigned a
di󰀨erent address before, the original programming will be deleted.