EasyManuals Logo

sks HTV4600 User Manual

sks HTV4600
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
43
Support Hotline: +49 (0) 2661 98088-112
Support E-Mail: support@sks-kinkel.de
Version No. 3.0
Document No. 97003704
SKS-Kinkel Elektronik GmbH
Indoor station HTV4600, Receiver, 6-wire
EN
Touch key Function Description
+
VID
Deactivate ringtone
Pick up the receiver and hold the image-tone key (for about 5
seconds) until you hear three short signal tones conrming that
the ringtone is now deactivated. To signal this the LED of the
image-tone key is ashing once per second.
Please mind that the ringtone is automatically reactivated
after 12 hours or after power failure.
The mute function is e󰀨ective for door calls and oor calls. In-
coming calls are still recognizable as the ashing of the LED of
the image-tone key gets faster and (if activated) the auto start
of the video image.
+
VID
Activate ringtone
To switch the ringtone back on the indoor station must be in idle
mode, i. e. no call is active.
Pick up the receiver and push the image-tone button for 1 sec-
ond. A long, high signal tone and the image-tone LED switch-
ing o󰀨 indicate that the task has been performed successfully.
Open door
After the indoor station was called the door can be opened
within 2.5 minutes with the door opener key.
+
Switch on automatic
door opener
To activate the automatic door opener pick up the receiver and
push the door opener button for 5 seconds until you hear four
signal tones.
These and the of LED 2 (around the tone image key) indicate
that the function has successfully been activated.
LED 2 keeps ashing as long as the automatic door opener is
active, ringtones are still audible.
Please mind that the automatic door opener is automatically
deactivated again after 12 hours or after power failure.
+
Switch o󰀨 automatic
door opener
To switch o󰀨 the automatic door opener pick up the receiver
and additionally push the door opener button for one second
until you hear a signal tone indicating that the automatic door
opener has successfully been switched o󰀨, the ashing of
LED 2 (around the tone image key) stops.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the sks HTV4600 and is the answer not in the manual?

sks HTV4600 Specifications

General IconGeneral
Brandsks
ModelHTV4600
CategoryIntercom System
LanguageEnglish

Related product manuals