SkyHopper PRO - RS-232;1 PPS Connector Pinout; Power Cable Connector Pinout; Appendix D: Setting up a Pixhawk Based System; SkyHopper Setup for Pixhawk

20 pages

To Next Page

To Previous Page

Appendix C – Connectors’ Pinout

C.1. RS-232/1PPS

Figure 8: RS232/1PPS connector (IOIOI) (SkyHopper PRO side)

SkyHopper PRO

Housing P/N: 502380-0600Pins P/N: 502381-0000

Name Description

1 N/A

2 RS232 out D9 Pin 2

3 N/A

4 RS232 in D9 Pin 3

5 GND

6 1PPS In

Table 6: RS232/1PPS connector pinout (IOIOI)

C.2. Power Cable

Figure 9: Power connector (SkyHopper PRO side)

SkyHopper PRO

Housing P/N: ZER-04V-S, Pins P/N: SZE-002T-P0.3

Description

1 GND (-VDC)

2 GND (-VDC )

3 Vin+ (+VDC)

4 Vin+ (+VDC)

Table 7: PWR Connector Type and Pin Mapping