213201ACA SJ40 T+, SJ45 T+, SJ61 T+, SJ66 T+
50
Section 4 – Inspections Before Operation Visual and daily maintenance inspections
4.2-10 Optional equipment
Do the inspection that follows, and make sure:
1
Generator
▪
There are no loose or missing parts, and there
is no visible damage.
▪
All hoses are correctly tightened and there is
no sign of hydraulic leakage.
2
Flashing amber light
▪
The lamp is correctly attached, and there is no
visible damage.
3
Welder
▪
The welder and the welder tray are correctly
attached.
▪
There are no loose or missing parts, and there
is no visible damage.
▪
There are no loose wires or missing fasteners.
4
Cold or arctic weather package
▪
The heater plugs are correctly attached with
no visible damage.
▪
There is no sign of engine oil leakage.
5
Tool tray
▪
The tray is correctly attached with lock-pins,
and there is no visible damage.
6
Glazier
▪
There are no loose or missing parts, and there
is no visible damage.
▪
Select the capacity derate switch to derate
mode, and check that the capacity derate light
turns on
7
Pipe rack
▪
There are no loose or missing parts, and there
is no visible damage.
▪
Select the capacity derate switch to derate
mode, and check that the capacity derate light
turns on
6
21 4
7
3
5
To Next Page
Loading...
