Skyjack SJ40 T+ - Environment; Tire;wheel specifications

213201ACA SJ40 T+, SJ45 T+, SJ61 T+, SJ66 T+
98
Section 7 – Technical Diagrams and Specifications Environment
7.5 Environment
Electromagnetic Compatibility (EMC)
Meets requirements of EN ISO 13766-1:2018
and IEC CISPR12:2007+A1:2009
Hazardous Location Rating
MEWP not rated for hazardous locations with potentially flammable
gases, explosive gases or particles
Operating Temperatures
Standard -20°C (-4°F) to +40°C (+104°F)
Cold Weather Package Below -10°C (+14°F)
Arctic Weather Package Below -18°C (0°F)
1848AB
1886AA
Tire Type Size
Ply
Rating
Wheel Nuts Torque
SJ40 T+/SJ45 T+
Foam 30.5 cm X 41.9 cm (12 in x 16.5 in) 10 393.2 Nm (290 ft-lb)
Solid 25.4 cm x 76.2 cm (10 in x 30 in) - -
SJ61 T+/SJ66 T+ Foam 38.1 cm x 49.5 cm (15 in x 19.5 in) 16 393.2 Nm (290 ft-lb)
1886AB
Tire Type Size
Ply
Rating
Wheel Nut Torque
SJ40 T+ and SJ45 T+
Foam 30.5 cm X 41.9 cm (12 in x 16.5 in) 10 or 12 393.2 Nm (290 ft-lb)
Solid 25.4 cm x 76.2 cm (10 in x 30 in) - 393.2 Nm (290 ft-lb)
SJ61 T+ and SJ66 T+ Foam 38.1 cm x 49.5 cm (15 in x 19.5 in) 16 393.2 Nm (290 ft-lb)
7.6 Tire/wheel specifications
WARNING
Do not use tires other than the tires that Skyjack
specifies for this MEWP. Do not mix different types
of tires or use tires that are not in good condition.
Only replace the tires with the same types that are
approved by Skyjack. The use of other tires can
make the MEWP less stable. If you do not obey,
there is a risk of death or serious injury.