59
SJ9233 RT, SJ9243 RT, SJ9253 RT, SJ9664 RT 221491AFA
Operator’s checklist Section 4 – Inspections Before Operation
1787AE
Platform assembly - Do an inspection for loose, damaged, or missing
components
Platform railings
Fall-protection anchorages
AC power socket
Platform control console
Manual storage box
Lift mechanism - Do an inspection for loose, damaged, or missing com-
ponents
Sliders
Maintenance support(s)
Scissor assembly
Scissor bumpers
Lift cylinders
Angle transducer
Optional equipment and attachments - Do an inspection for leaks and
loose, damaged, or missing components
Function Tests
Do a test of the main power disconnect switch
Do a test of the control module and load sensing module self-check
Do a test of the emergency-stop button on the base
Do a test of the off/base/platform key switch
Do a test of the base lift enable switch
Do a test of the lower/neutral/raise switch
Do a test of the emergency-lowering function
Do a test of the emergency-stop button on the platform
Do a test of the function-enable switch
Do a test of the steer function
Do a test of the drive function
Do a test of the anti-tiedown function
Do a test of the brakes
Do a test of the platform raise and lower functions
Do a test of the horn
Do a test of the elevated travel speed
Do a test of the outrigger interlocks (optional equipment)
Do a test of the generator (optional equipment)
Do a test of the SGLE switch (optional equipment)
Do a test of the positive air shutoff (optional equipment)
NOTE: Make a copy of this page or go to www.skyjack.com for a copy that you can print.
Operator’s checklist
P N/A Comment (if item does not pass inspection)
Visual and Daily Maintenance Inspections
(page 2 of 2)
To Next Page
Loading...
