Skyjack SJM Series User Manual

SKYJACK, Page 7
August 2007
Section 1 - About Your Aerial Platform
SJM & SJII Series
1-1. Scope Of This Manual
a. This manual applies to the ANSI/SIA, CSA and
CE versions of the SJM & SJII Series aerial platform
models listed on (Tables 2-1.)
- Equipment identified with “
ANSI” meet the
ANSI SIA-A92.6-1990 standard.
- Equipment identified with “CSA” meets the
CAN3-B354.2&.3-M82 standards.
- Equipment identified with “CE” meets the
requirements for the European countries, i.e.
Machinery Directive 89/392/EEC, 98/37/EEC and
EMC Directive 89/336/EEC and the corresponding
EN standards.
b. CSA (Canada) and CE (Europe)
Operators are required to conform to national,
state/province and local health and safety
regulations applicable to the operation of this
aerial platform.
c. ANSI/SIA (United States)
Operators are required by the current ANSI/SIA
A92.6 standards to read and understand His/Her
RESPONSIBILITIES in the Manual Of
Responsibilities before they use or operate this
aerial platform.
1-2-a. Warranty Statement
SKYJACK Inc. warrants each new aerial platform to be
free of defective parts and workmanship. During the
first full year, labor and replacement parts will be
provided by the local authorized Skyjack dealer without
charge. For the following 48 months, structural
components found to be defective will be replaced or
repaired at no charge.
A warranty registration card is supplied with each aerial
platform. The warranty is only effective when the warranty
card has been completed and returned to Skyjack within
15 days of invoiced. When aerial platforms are put into
Dealer’s stock, the warranty period does not start until
the aerial platform has been shipped to the dealer’s
customer. When a unit is put into service and no warranty
card has been mailed to Skyjack Inc., the warranty
period will commence 15 days from the date the dealer
was invoiced for the aerial platform.
All warranty claims are subject to approval by Skyjack’s
Service Department. Skyjack Inc. reserves the right to
limit or adjust claims with regard to defective parts, labor
or travel time based on usual and customary guidelines.
Parts purchased from sources other than Skyjack will
not be covered under this warranty. Misuse or improper
operation, lack of normal maintenance and inspections
as outlined in this Operating Manual or the Operating
Maintenance and Parts Manual, alterations to original
design and/or components or accidents will void all
warranty. Batteries or Engines are not covered by this
warranty.
The above mentioned warranty statement is exclusive
and no other warranty whether written, oral or implied
shall apply. Skyjack excludes any implied warranty of
merchantability and fitness and accepts no liability for
consequential damages or for other negligence.
1-2-b. Warranty Procedures
The selling distributor or authorized dealer shall be
responsible for the complete handling of customer
claims under this warranty. Here is what to do:
1. When a customer files a claim under this warranty,
contact Skyjack’s Service Department to verify
warranty coverage. NOTE: The complete serial
number of the aerial platform is required to verify the
claim.
1

Skyjack SJM Series Specifications

General

Brand	Skyjack
Model	SJM Series
Category	Scissor Lifts
Language	English