_________________________________________________
Page 26
Menu choice PLAY MUSIC
If desired, audio files can be loaded into the unit and played. The
files must be entered using a special format.
This function is to enable testing of the unit´s sound quality.
For anyone interested in trying this out, the programme „Switch
Sound File Converter“ can be used to convert files for use.
The following settings must be used:
•
Output format: .raw
•
encoder Options:
•
Format: 8 bits signed
•
Sample rate: 22050
•
Channels: Mono
The converted files can then be copied to the SOUNDS folder using
a PC.
Menu choice FIRMWARE UPDATE
Displays the current Firmware version and whether any updates
have been downloaded and ready for installation. If new versions
exist and are waiting to be installed, press OK to start the
installation. A restart is necessary so when installed, the unit will shut
down automatically.
To Next Page
Loading...
Need help?
General