11
SECTION IV MAINTENANCE
4-1. Preventive Maintenance
The following preventive maintenance checks and
services are recommended to ensure the service-
ability and proper operation of your SKYTRON
Surgical Table.
a. During normal cleaning, a general visual
examination should be made checking for leaks,
loose bolts or parts, and cracked, chipped, or
missing paint. Any necessary repairs should be
made.
b. Semi-annually the following checks and
services should be performed:
1. Check all hydraulic fittings, mini-valves and
slave cylinders for proper operation and
any signs of leaks.
2. Check the hydraulic speed controls and
adjust if necessary.
3. Pressure check (with a gauge) the pres-
sure relief valve.
4. Check all mechanical adjustments and ad-
just as necessary.
5. Check hydraulic fluid level.
6. Lubricate the slider assembly.
4-2. Service
Table maintenance can be performed by trained
maintenance personnel using SKYTRON autho-
rized replacement parts and service techniques.
Service instructions and parts are available from
SKYTRON.
Preventive Maintenance contracts are available
through your local SKYTRON representative.
To obtain service instructions, replacement parts,
factory service or preventive maintenance con-
tracts, contact your nearest SKYTRON represen-
tative or write or call:
SKYTRON
5000 36th Street S.E.
Grand Rapids, MI 49512
1-800-SKYTRON (1-800-759-8766)
Fax. 1-616-957-5053
3-7. Specialty Positioning
The use of certain optional accessories available
from SKYTRON further extend the positioning
capabilities of the 6000/6001 Series Tables. Refer
to SKYTRON's "Positioning Guidelines" or contact
your SKYTRON representative for further details.
To Next Page
Loading...
Need help?
General
