collision signal, BCM will
execute central control
unlock 2 times with an
interval of 2 seconds
(independent of door
status).
2. Within 30 minutes after the
BCM detects a valid
collision signal and the
hazard light and dome light
work, the lock action is
prohibited; the key is
turned OFF and then
turned ON to cancel the
lock prohibition.
Lock motor
thermal protection
If there are more than 10 lock
actions within 25s, the lock
action is prohibited for 30s (all
lock actions are prohibited).
Within 30s of protection, make
sure that the last command is
unlocking instead of locking (if
it is unlocked, the central
control lock will not perform
any action, if it is locked, it is
allowed to unlock once); within
30s of protection, if the collision
conditions are met, BCM will
execute the central control
unlock described in the
collision unlock.
Power outlet
USB
When the vehicle is powered
on, it can be charged by
connecting the USB interface.
To Next Page
Loading...