DC charging
Start charging
1. Park the vehicle in the DC
charging area, turn the
gear to P, and apply the
parking brake.
2. Please check before
charging：
The charging equipment is
not scratched, rusted, cracked,
or the vehicle plug, cable,
control box, wire, and power
plug surface are not damaged;
if the charging equipment or
the charging connection device
surface is damaged, rusted,
cracked or the connection is
too loose , do not charge；
When the power plug or
vehicle plug is dirty or wet,
wipe the plug with a dry and
clean cloth to ensure that the
charging plug is dry and clean.
3. Take out the charging
connection device and
correctly connect it to the
charging port of the
charging pile.
4. Press the DC charging port
cover on the right fender of
the vehicle, open the
charging port protection
cover, and confirm that the
vehicle charging port is
normal.
To Next Page
Loading...