12V power supply
The 12V power supply is
located on the left side of the
sub-instrument. When the
vehicle is powered on, it can be
discharged through this socket.
220V power supply
The 220V power supply is
located at the rear of the
sub-instrument, under the
CNSL RR air duct assy. When
the vehicle is powered on, turn
on the "Allowed discharge"
switch on the large screen to
use electrical equipment
through this socket.
Maximum support current: 10A
Warning：
1. It is strictly forbidden to
insert metal terminals and
wires into socket jacks；
2. The use of fake products is
strictly prohibited；
3. Please use medical or
healthcare electronic
equipment with caution；
4. Do not touch the socket
with water on your hands；
5. It is strictly forbidden to
To Next Page
Loading...