Fuse replacement
The fuse is used to prevent
overloading of electrical circuits
and components. If any
electrical component does not
work, it may be caused by a
blown fuse. If this happens,
you need to check and replace
the fuse in time.
Distribution of
electrical boxes
Open the Front cabin, the front
fuse box assembly is located
on the right side of the Front
cabin, press the tabs on both
sides to lift the cover to check
or replace the fuse.
The instrument panel electrical
box is located behind the
storage box on the lower left
side of the instrument.
Check Front cabin fuse
1. Turn off all electrical
equipment and start switch；
2. Disconnect the battery
negative cable；
3. Remove the front fuse box
assembly cover, and check
the malfunction fuse
according to the fuse
position distribution chart
inside the box cover.
Check the dashboard fuse
1. Turn off all electrical
equipment and start switch；
2. Disconnect the battery
negative cable；
To Next Page
Loading...