Skywell ET5 2021 - Convenient Wiper Service; Front Washing Operation; Rear Wiper Operation

In-car function
129
7
HI (5position in the figure),
BCM drives the wiper motor to
move at high speed (60r/min).
Rear wiper
operation
Turn the wiper adjust handle to
ON, and the rear washing
starts to work;
When the front wiper is turned
on, if the gear is in "R" gear,
the rear wiper will automatically
turn on；
When the rear wiper is working,
if the rear door is opened, the
rear wiper will stop working.
After the rear door is closed,
the rear wiper will continue to
work.
Convenient wiper
service
After the vehicle is powered off,
the right handle of the
combination switch is operated
above MIST/Lo 2s to realize
the wiper repair function.
Front washing
operation
When the vehicle is powered
on and the front door is closed,
turn on the front washing
switch (≥ 300ms), if the wiper
switch is in OFF, INT, AUTO,
or LO, the washing liquid will
be sprayed and the wiper
motor will work at low speed；
If the wiper switch is in the HI
block, the washing liquid will be
sprayed and the wiper motor
will work at high speed.