EasyManua.ls Logo

Skywell ET5 2021 - Cleaning and Maintenance of External Plastic Parts

Skywell ET5 2021
313 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Vehicle specifications
272
10
Do not spray water from
the nozzle towards the
charging port
5. Do not spray water directly
from the hose toward the
window, door or front trunk
cover seal, or spray water
into the brake parts through
the hub hole
6. Avoid using cotton flannel
or coarse cloth, such as car
cleaning gloves
7. If the automatic vehicle
cleaning machine is used
for cleaning, only the
non-contact car washing
machine can be used. This
type of car washing
machine has no parts
(brushes, etc.) that touch
the surface of the car body.
Damage caused by using
any other type of car
washing machine is not
covered by the warranty
8. Do not use chemical tire
cleaners, otherwise it may
damage the surface of the
wheel
9. The rear-view camera or
radar sensor should avoid
using high-pressure
cleaners. Do not use sharp
or rough objects to clean
the sensor or camera lens,
otherwise it will scratch or
damage its surface.
Cleaning and
maintenance of
external plastic
parts
Usually clean with water, soft
cloth and soft brush.
Caution
Do not use solvent-containing
cleaning materials when
cleaning plastic parts,
otherwise it will easily cause
damage to the plastic parts.

Table of Contents