Skywell ET5 2021 - Gear Description; Shift Control

Use and driving
163
8
a drivable state；
2. Depress brake pedal and
press the ignition switch
once. The meter displays
the READY state, vehicle is
in a drivable state.
Turn off the power system：
1. After stopping the vehicle
safely, step on brake pedal;
2. Set the vehicle shift knob to
P gear;
3. Press the ignition switch
button to turn off the power
system.
Caution：
1. Do not operate the ignition
switch again within 15
seconds after the vehicle is
turned off the power
system to avoid damage to
the power battery relay;
2. Do not perform frequent
power-on and power-off
operations to avoid
damage to the power
battery relay.
Shift control
Operation gear knob
In the vehicle READY state,
step on brake pedal, and turn
the gear knob from P gear to D
gear.
Release the parking brake,
release brake pedal, and drive
the vehicle slowly.
Gear description
The driver has 5 gears (P, R, N,
D, S) to choose during the
operation, the selected gear
displays the corresponding
gear information in the
instrument cluster assy.
P gear is a parking gear, at this
position, the EPB system is