when BCM receives the unlock
command from the remote
control key or mobile phone
APP and waits for 30s, the four
doors, tailgate and front hatch
do not have any opening or
closing action or locking action
for 30s , The vehicle enters
anti-theft mode again.
Intrusion mode
BCM is in anti-theft mode, any
of the four doors is opened, the
status of the hood changes
(closed to open), and the back
door is opened illegally, the
vehicle enters the intrusion
mode and starts to warning.
The horn device works for 28s
and pauses for 5s. The left and
right turn signals flash for 28
seconds, pause for 5 seconds,
and the APP displays the
warning information. If the
intrusion source disappears,
the BCM will stop the warning
after the current warning cycle
ends and enter the anti-theft
mode. When the same warning
source continues to trigger
(such as the left front door
keep opened), the warning
lasts for 3 cycles at most; after
3 warning cycles, the vehicle is
still in Intrusion mode, the turn
signal and horn device do not
work.
Low speed
reminder function
When the electric vehicle is
running, the sound is used to
remind the surrounding
vehicles and pedestrians to
avoid.
When the vehicle is moving
forward:
1. 0km/h≤speed≤20km/h，
beep increases with the
increase of vehicle speed；
2. 20km/h<speed≤30km/h，
beep decreases with the
increase of vehicle speed；
3. speed>30km/h，no sound.
When the vehicle is reversing:
To Next Page
Loading...