turned on, low beam, position
light, license plate light, and
LOGO light are on for 30s.
Lead me to the
vehicle
When the following conditions
are met：
1. Vehicle is powered off；
2. Lead me to the vehicle
function is turned on;
3. Receive unlock signal.
The lead me to the vehicle
function is turned on, and the
low beam, position light,
license plate light and LOGO
light are all lit for 60s.
Wiper
1. Front wiper control handle
2. Intermittent wiper
sensitivity adjustment
switch
3. Rear wiper control handle
Front wiper
operation
The wiper adjustment handle is
used to control the front and
rear windshield wipers and
scrubbers. The front windshield
wipers are divided into five
gears.：
1. MIST：Single action
2. OFF：Stop mode
3. AUTO ： Automatic mode
(INT for low model)
4. LO：Low speed wipe mode
5. HI：High speed wipe mode
To Next Page
Loading...