Coolant
Check whether the coolant
level is between the MAX and
MIN marks. If the liquid level is
at or below the MIN mark, you
need to add a cooler until it is
between MAX and MIN.
Caution：
1. If the liquid level drops too
fast, check the radiator,
water pipe and other parts
for leakage；
2. Coolant (50% glycol + 50%
water) must be added to
ensure normal
anti-corrosion and cooling
performance.
Warning：
1. Coolant is toxic. Be careful
when adding coolant to
avoid spilling on any parts
of the vehicle, human body,
or the ground. If the liquid
contacts the skin or eyes
accidentally, rinse with
plenty of water and seek
medical attention
immediately；
2. When the coolant
temperature is high, there
may be pressure inside the
cooling system, and
removing the lid may cause
burns or other injuries
because of the hot coolant
spray.
Brake fluid
The normal level of brake fluid
should be between the MIN
and MAX marks, and brake
fluid needs to be added if it is
at or below the MIN mark.
To Next Page
Loading...