Precautions for
driving through
stagnant water
sections
1. The depth of the water
must be clear before
driving into the water
section, and the height of
the water must not exceed
the lower edge of the
vehicle body.
2. If you want to wading
through the water, turn off
the air conditioning before
the vehicle starts, slow
down, and then lightly step
on the PEDAL ASM
BRK&ACCEL&CLU
without loosening your feet,
and pass through the water
section at a steady and
slow speed.
3. Do not park the vehicle in
the water, and do not
reverse and turn off the
motor in the water.
4. After smoothly wading
through the stagnant area,
you must step on brake
pedal several times to
evaporate the water on the
brake disc in order to
restore normal braking
performance as soon as
possible.
Warning：
1. Water or mud on the
surface of the brake disc
may cause the brake
response to lag, thereby
extending the braking
distance, and beware of
accidents.
2. Brake carefully, dry and
wet the brakes, remove the
ice on the brakes.
3. Avoid emergency braking
as much as possible after
driving through a section of
stagnant water.
To Next Page
Loading...