1. The current state of the
power battery：
► The power battery is
fully charged；
► When the ambient
temperature is low, braking
energy recovery is limited.
2. Energy recovery settings
used：
► Set different energy
recovery levels to adjust the
intensity of braking energy
recovery.
3. Driving mode：
► Different driving modes
have different intensity of
braking energy recovery.
Warm reminders:
If energy recovery braking
significantly reduces the speed
(for example, when driving on a
steep slope), the brake light will
light up to remind the driver of
the vehicle behind that you are
slowing down.
Caution：
Deceleration through energy
recovery braking cannot
replace the braking required to
ensure safety. The driver
should apply the brakes to the
vehicle in time according to the
actual situation.
Electronic Stability
Program(ESP)
The Electronic Stability
Program is an active safety
control system. The system
sensors monitor the driving
state of the car. When the car
avoids obstacles, turns and
other unstable conditions, as
well as oversteer or understeer,
it uses the power system to
intervene and the braking
system intervenes to help the
vehicle overcome the tendency
to deviate from the ideal
trajectory and provide better
safety for the vehicle. If braking
a wheel alone is not enough to
To Next Page
Loading...