starts or accelerates, the drive
wheels will also slip; TCS
controls the brake pressure
and motor power to minimize
wheel idling.
Anti-lock Braking System
(ABS)
ABS prevents the wheels from
locking up when you apply the
maximum braking force. In
most road conditions, it can
improve the steering control
performance of the vehicle
under emergency braking. In
the case of emergency braking,
ABS continuously monitors the
speed of each wheel and
adjusts the braking pressure
according to the tightness of
the wheel. The brake pressure
change can be sensed by the
vibration signal fed back by
brake pedal. This shows that
ABS is working and no special
attention is needed. When you
feel the vibration, please
continue to apply continuous
steady pressure to brake
pedal.
Anti-lock Braking System (ABS)
indicator
When the vehicle is powered
on, the (ABS) indicator on the
dashboard will light up for a
few seconds, and then go out
after the system completes the
self-check. If the indicator does
not go out or lights up at any
time after the self-inspection, it
indicates that the ABS has a
malfunction and does not work,
and you should immediately
contact Jiangsu Skywell
authorized service provider for
inspection.
When the ABS has a
malfunction, the braking
function is still normal and will
not be affected by the ABS
malfunction, but the braking
distance will increase.
Emergency braking In an
emergency, step on brake
pedal completely and maintain
a stable pressure. ABS
changes the braking pressure
To Next Page
Loading...