Cleaning the parking sensor
When cleaning the vehicle,
please use a soft cloth or water
(low water pressure) to wash
away the snow, mud, dust and
other obstacles on the surface
of the reversing radar sensor.
High pressure water flow such
as water gun or large external
force may cause damage to
the radar probe. Do not
squeeze or impact the radar
probe, otherwise the probe will
not work properly.
If the buzzer does not sound
when reversing, please check
the following points：
1. Is there any foreign matter
attached to the surface of
the radar probe；
2. Whether to park the vehicle
for a long time in hot or
cold weather；
3. The radar probe cannot
detect whether the wire,
fence, or the surface of the
radar probe is frozen.
If you cannot find out the cause,
please contact Jiangsu Skywell
authorized service provider for
inspection；
To Next Page
Loading...