and resume manual
driving；
9. During the cruise system
control process, when the
target vehicle in the
adjacent lane quickly cuts
into the vehicle at a close
distance, the driver needs
to take the initiative to take
over the vehicle and
resume manual driving.
10. When the cruise system
cannot maintain the
minimum time distance
with the vehicle in front, for
example, when
approaching the vehicle in
front at a high relative
speed. In this case, the
driver must take over the
longitudinal control of the
vehicle；
11. Regarding stationary
objects, the cruise system
only recognizes
conventional passenger
cars and pedestrians, for
other stationary vehicles
(such as trailers, trucks,
flatbed trucks, cement
mixers, tricycles,
two-wheelers, vehicle
trunks are open, etc.) and
stationary objects ( Such
as railings, roadblocks,
stones, etc.) do not make
identification and
judgment, if you need to
brake, please take the
initiative to step on the
brake pedal.
12. The recognition of
stationary targets will be
limited by many factors in
the cruise system, and
may not be able to slow
down in time. If there is a
stationary target car in
front of the lane, the driver
needs to take the initiative
to take over the vehicle
and resume manual
driving to avoid collisions
with the preceding vehicle；
13. Incorrect activation of the
cruise control function may
To Next Page
Loading...