such as heavy rain, snow,
etc., will cause the system
function to decline. In this
case, the relevant target
will not be detected by the
system or the detection
time is too late；
Warning：
1. The above list does not
describe all the situations
that affect the normal
operation of the system. Do
not rely on these conditions
to ensure your own safety.
The driver is responsible
for staying alert at all times,
driving safely, and
controlling the vehicle.
ETC (Electronic
Toll Collection)
function
description
Introduction:
ETC (Electronic Toll Collection)
is an automatic toll collection
system for highways or bridges.
Through dedicated short-range
communication between the
on-board electronic label
installed on the windshield of
the vehicle and the microwave
antenna on the ETC lane of the
toll station, using computer
networking technology to
conduct background
settlement processing with
banks, so as to achieve the
purpose of paying highway or
bridge fees without stopping
the vehicle through the
highway or bridge toll station.
This toll system takes less than
two seconds to charge for each
vehicle, and the capacity of the
toll channel is 5 to 10 times of
the manual toll channel. The
use of a fully automatic
electronic toll system can make
the road toll management
paperless and cashless ，
eliminate the loss of toll fares
To Next Page
Loading...