3. Insert the lock tongue into
the lock buckle until it
makes a “click” sound to
ensure that the lock tongue
is in place;
4. Pull out the seat belt
forcefully to check whether
the seat belt is locked;
5. Retractor retracts the
excess seat belt part.
Release seat belt
1. Hold the lock tongue with
your hand and press the
release button;
2. Retract the seat belt into
the retractor slowly.
Seat belt untied
indicator
When the vehicle is powered
on，the driver and co-pilot are
seated, if the seat belt is not
attached, the seat belt untied
indicator lights up, and the
indicator light goes out when
the seat belt is attached.
When the vehicle is powered
on, if the seat belt is not
fastened after the occupants in
To Next Page
Loading...