Slayer Professional Series - Page 31

31
SLAYER STEAM X USER MANUAL
SET CURRENT TIME/DAY
1. Press and hold the jog wheel above the left grouphead for five seconds to
activate the Advanced Menu options.
2. Rotate the jog wheel clockwise until the “Set Time/ Day” setting appears.
3. Press and release the jog wheel to enter the “Set Time/ Day” setting. The option
to adjust the clock type will be presented.
4. Rotate the jog wheel to cycle between “12H” (12-hour clock) and “24H” (24-hour
clock).
5. Press and release the jog wheel to confirm your new setting and proceed to the
next step. The option to adjust the hour will be presented.
6. Rotate the jog wheel to adjust the hour.
7. Press and release the jog wheel to confirm your new setting and proceed to the
next step.
8. Repeat steps 6-7 for all remaining settings:
• Min (minute)
• Day
9. Press and release the jog wheel to confirm your new setting and return to the
menu for additional adjustments OR move the brew actuator Left to Right to
save and exit the Advanced Menu.
Time/ Day must be programmed before you can move onto setting up Power Save
options.
PROGRAM ON/OFF TIMES FOR POWER SAVING
1. Press and hold the jog wheel above the left grouphead for five seconds to
activate the Advanced Menu options.
2. Rotate the jog wheel clockwise until the “Times For Power Save To Begin”
setting appears.
3. Press and release the jog wheel to enter the “Times for Power Save To Begin”
setting. The option to adjust the “on at” setting for the weekday schedule
(Monday-Friday) will be presented.
4. Rotate the jog wheel to adjust the “on at” setting for the weekday schedule to
the exact time you want the feature to turn on. The “on at” setting determines
the time at which the machine will enter power-save mode and fall asleep.
5. Press and release the jog wheel to confirm your new setting and proceed to the
next step; the option to adjust the “off at” setting for the weekday schedule will
be presented.
6. Rotate the jog wheel to adjust the “off at” setting for the weekday schedule the
exact time you want the feature to turn off. The “off at” setting determines the
time at which the machine will be ready to resume normal operations or wake
up. The machine will exit power-save mode and begin heating thirty minutes (30
minutes) before the programmed “off at” time.
7. Press and release the jog wheel to confirm your new setting and proceed to the
next step. The option to configure the weekend schedule (Saturday-Sunday) will
be presented.
8. Repeat steps 4-7 for every day of the week. Adjust accordingly for the weekend
schedule to accommdate varied hours of operation.
9. Press and release the jog wheel to confirm your new setting and return to the
menu for additional adjustments OR move the brew actuator Left to Right to
save and exit the Advanced Menu.
BREW TEMP OFFSET
When adjusting a brew temp offset you will need a scace device or the professional
services provided by a Slayer technician.
1. Press and hold the jog wheel above the left grouphead for five seconds to
activate the Advanced Menu options.
2. Rotate the jog wheel clockwise until the “Brew Temp Offset” setting appears.
3. Press and release the jog wheel to enter the “Brew Temp Offset” setting. The
option to adjust the offset for the leftmost grouphead (Gp1) will be presented.
4. Rotate the jog wheel to adjust the brew temperature offset for the leftmost
grouphead in tenth-degree (0.1-degree) Fahrenheit increments: clockwise
rotations increase the offset value; counter-clockwise rotations decrease the