14
RAIL TROUBLESHOOTING
TOOLS NEEDED:
PHILLIPS SCREWDRIVER
3MM ALLEN WRENCH
MALLET
(2) 17MM WRENCHES, PLYERS
If your rails are not traveling back and forth:
Check that the rail brackets are not bent or loose.
If they are bent, take off the bracket, try to straighten it out
and put it back on.
Row to see if the rails are corrected. If unable to straighten,
call customer support @ 800-455-9022 for a replacement.
If the brackets are not bent, clean the wheels and check that
they are spinning properly.
To Next Page
Loading...