Ref : 26702 10 07/01/15
→ VITR Glazing option OUI/NON Set in Factory
→ CELL Cell management : NON/OUI/LIMI
→TYPE Door type: Mobile (MOBI), Swinging (BATT), Fixed (FI) Set in Factory
MOBI or FI are the type of skate on automatic doors
→ rMF2 MULTIFUNCTION RELAY 2 : buZZ/butE/Vent/CAME
→ rMF1 MULTIFUNCTION RELAY 1 : buZZ/butE/Vent/CAME
→ PINI Factory parameters INI, SAVE, IN01, ..., IN30 Set in Factory
→ CYCL
No. of cycles performed x 1000 Information
→ ERR Last 10 recorded errors, Errx/EFFA Information
→ MOTR ASYN/BRUS motor type selection Set in Factory
→ BAUD
CAN parameter Not used
→ PRTE CAN parameter Not used
END of CONFIGURATION
To exit the parameters menu, simultaneously press and .
If the card has never been started, it displays APPr
To Next Page
Loading...