Need help?Do you have a question about the SMA EV Charger 7.4 and is the answer not in the manual?
General| Brand | SMA |
|---|---|
| Model | EV Charger 7.4 |
| Category | Battery Charger |
| Language | English |
Specifies the product models for which this document is applicable.
Identifies the intended users and required skills for operating the product.
Outlines the content and organization of the operating manual.
Explains the different severity levels of warning messages used in the manual.
Defines the meaning of symbols used throughout the document for clarity.
Details the use of typographical elements for formatting and emphasis.
Lists the complete and abbreviated designations used for the product.
Defines the proper and intended applications for the SMA EV Charger.
Essential safety information that must be observed during product operation.
Critical warnings regarding dangers from electric shock and overvoltages.
Information on potential risks of fire or explosion under fault conditions.
Precautions for handling toxic substances and potential health risks.
Notices regarding product damage from ingress and improper cleaning.
Advice on selecting an appropriate internet tariff to avoid high costs.
Lists all components included in the product's delivery package.
Details the physical components and design of the SMA EV Charger.
Explains the meaning of various symbols found on the product itself.
Describes the available interfaces and key functionalities of the product.
Information on the Speedwire communication standard used by the product.
Details on connecting to the product via Wi-Fi, including apps.
Information about the SMA Smart Connected monitoring service.
Explains the meaning of different LED signal patterns for product status.
Illustrates how the EV Charger integrates within a larger energy system.
Provides a schematic overview of the product's electrical circuitry.
Illustrates the communication pathways within the product system.
Specifies the necessary conditions and restrictions for mounting the product.
Provides the specific dimensions required for product installation.
Details the required clearances for proper ventilation and heat dissipation.
Step-by-step instructions for physically mounting the EV Charger.
Identifies the various connection points on the product exterior.
Details the internal terminal blocks for wiring connections.
Instructions for fitting the cable glands and terminal cover.
Guidance on connecting the product to the utility grid's AC power.
Procedure for establishing additional grounding for safety.
Steps for connecting the charging cable to the EV Charger.
How to connect a signal source to the product's digital input.
Instructions for connecting the product to a network via Ethernet.
An overview of the sequence of steps for initial product setup.
Detailed steps for completing the initial commissioning of the product.
How to modify the product's network settings if needed.
Guide for using the setup wizard to configure the product.
Methods for connecting to the product's user interface.
Connecting directly to the product via Wi-Fi without a router.
Using Wi-Fi Protected Setup for network connection.
Connecting by searching for available Wi-Fi networks.
Connecting the product to a local network via Ethernet cable.
Connecting the product to a local network via Wi-Fi.
An overview and explanation of the product's user interface elements.
Steps for enabling the WPS feature on the product.
Procedure for changing the password for the logged-in user.
Details the characteristics of the different available charging modes.
Instructions on how to change between the product's charging modes.
Step-by-step instructions to safely disconnect the product from all voltage sources.
Guidelines for cleaning the product safely and effectively.
Steps to reset the administrator password using a device key.
Explanation of event codes, their causes, and corrective measures.
Steps for safely removing and preparing the product for disposal or storage.
Instructions for replacing a defective product with a new unit.
Electrical specifications for AC power connection.
Information on the product's built-in safety and protective features.
Key physical and environmental operating data for the product.
Specifications regarding terminals, interfaces, and network connectivity.
Required torque values for various screws during installation and maintenance.
Details on how long different types of data are stored by the product.
Contact details for technical assistance and service inquiries.
Statement confirming product compliance with relevant EU directives.
To Next Page