8 Operation
SMA Solar Technology AG
Operating manualEVCxx-10-BE-en-1038
8 Operation
8.1 Establishing a connection to the user interface
8.1.1 Establishing a direct connection via WLAN
You have several options to connect the product to an end device. The procedure can be different
depending on the end devices. If the procedures described do not apply to your end device,
establish the direct connection via Wi-Fi as described in the manual of your end device.
The following connection options ar available:
• Connection to SMA 360° App
• Connection with WPS
• Connection with Wi-Fi network search
Requirements:
☐ The product must be commissioned.
☐ An end device (e.g. computer, tablet PC or smartphone) must be available.
☐ The respective latest version of one of the following web browsers must be installed: Chrome,
Edge, Firefox or Safari.
☐ JavaScript must be enabled in the web browser of the end device.
SSID, IP address and WLAN password
• SSID in WLAN: SMA[serial number] (e.g. SMA0123456789)
• Device-specific Wi-Fi password: see WPA2-PSK on the type label of the product
• Standard access address for a direct connection via Wi-Fi outside of a local network:
http://smalogin.net
Connection to SMA 360° App
Requirements:
☐ An end device with camera must be available.
☐ The SMA 360° App must be installed on the end device.
☐ An user account for SunnyPortal must already exist.
Procedure:
1. Open the SMA 360° App and login with dem SunnyPortal account details.
2. Select QR-Code Scan in the menu.
3. Scan the QR Code on you product via the SMA 360° App.
☑ The end device automatically connects to the product. The web browser of your end
device opens and the welcome or login page of the user interface is displayed.
4. If the web browser of your end device does not open automatically and the welcome or login
page of the user interface is not displayed, open the web browser and enter http://
smalogin.net in the address bar.
To Next Page
Loading...