SMA EV Charger 7.4 - Product Decommissioning; Decommissioning Procedure

12 Decommissioning the Product
SMA Solar Technology AG
Operating manualEVCxx-10-BE-en-1054
12 Decommissioning the Product
To decommission the product completely upon completion of its service life, proceed as described
in this Section.
CAUTION
Risk of injury due to weight of product
Injuries may result if the product is lifted incorrectly or dropped while being transported or
mounted.
• Wear suitable personal protective equipment for all work on the product.
Procedure:
1.
DANGER
Danger to life due to high voltages
• Disconnect the product from voltage sources (see Section9, page45).
2.
CAUTION
Risk of burns due to hot enclosure parts
• Wait 30 minutes for the enclosure to cool down.
3. Unscrew the swivel nut from the threaded sleeve for
the network cable.
2
1
4. Remove the threaded sleeve from the thread of the
network port on the product.
2
1
5. Release the network cable plug and pull it out of the
jack on the product.