4 Product Overview
SMA Solar Technology AG
Operating manual EVCxx-10-BE-en-10 13
Position Designation
D Label with QR Code for scanning via the SMA 360° App and easy con-
nection to the inverter's user interface via WLAN
E Type label
The type label clearly identifies the product. The type label must remain
permanently attached to the product. You will find the following informa-
tion on the type label:
• Device type (Model)
• Serial number (Serial No. or S/N)
• Date of manufacture
• Identification key (PIC) for registration in Sunny Portal
• Registration ID (RID) for registration in Sunny Portal
• Wi-Fi password (WPA2-PSK) for the direct connection to the user
interface of the product via Wi-Fi
• Device-specific characteristics
4.2 Symbols on the Product
Symbol Explanation
Beware of electrical voltage
The product operates at high voltages.
Beware of hot surface
The product can get hot during operation.
Observe the documentation
Observe all documentation supplied with the product.
Charge mode
The symbol together with the green LED indicates that the product is in charg-
ing mode.
Observe the documentation
Together with the red LED, this symbol indicates an error.
Data transmission
Together with the blue LED, this symbol indicates the status of the network con-
nection.
To Next Page
Loading...