SMA EV Charger 7.4 - Page 23

5 Mounting
SMA Solar Technology AG
Operating manual EVCxx-10-BE-en-10 23
5. Insert the screws until there is at least 6mm clearance between the screw head and the
support surface.
6. Remove the brown adhesive tape from the product.
7. Attach the mounting bracket with conical spring
washer and hexagon socket cap head screw to the
product (torque: 6Nm ± 0.3Nm).
8. Hang the product onto the screws using the metal
brackets.
9. Insert hexagon head screw with washer through the
mounting bracket and tighten with a suitable tool
(torque: 6Nm ± 0.3Nm).