SMA Solar Technology AG 6 Electrical Connection
Installation Manual SB13_21TL-IA-en-65 29
12. When using pressure screw, clamping cage and
sealing ring, screw the pressure screw firmly onto
the threaded sleeve. In the process, the clamping
cage will be pressed into the threaded sleeve and
no longer be visible.
13. When using the cable gland, screw the cable
gland firmly onto the threaded sleeve.
☑AC coupling socket is now assembled.
14. Insert the AC coupling socket into the AC female
connector on the inverter. If necessary, remove the
protective cap beforehand.
15. If the AC coupling socket is not to be connected to
the inverter immediately, close the AC connector
on the inverter with the protective cap provided.
To Next Page
Loading...
