SMA America, LLC Mounting
Installation Guide SB30-40US-IUS103030 33
3. Hook the Sunny Boy using the enclosure opening in the back plate into the wall bracket (1).
4. Inspect the Sunny Boy from both sides to ensure that it sits centered on the wall bracket (2).
5. Screw the Sunny Boy onto the wall mounting bracket on both sides using the screws provided
(3). Tighten the screws clockwise with a torque of 44in‑lbs. (5 Nm).
6. Check that the unit is securely in place.
7. Put the handle covers over the handles.
The air grills are marked "rechts/right" and "links/left" on the interior for proper assignment.
The air grills prevent dirt and insects from entering the device and if necessary, can be reordered
from SMA.
☑ The Sunny Boy is mounted.
To Next Page
Loading...
