SMA SUNNY CENTRAL CP XT Series - Changing System Settings Via Touch Display; Selecting the Language; Setting the Date, Time and Time Zone; Selecting the Display Format

4 Commissioning
SMA Solar Technology AG
User Manual 45SCCPXT-E7-BA-en-58
4.6.12 Changing System Settings via Touch Display
4.6.12.1 Selecting the Language
1. Select .
2. Select .
3. Use the country symbol to select the language.
4. Confirm your entry by selecting .
4.6.12.2 Setting the Date, Time and Time Zone
Inverter adopts changes
The inverter will adopt date, time or time zone changes made via the display.
Procedure:
1. Select .
2. Select .
3. To change the date, select the day, month and year in the field . Use the and buttons to change the day,
month and year.
4. To change the time, select the hours, minutes and seconds in the field . Use and to change the hours,
minutes and seconds.
5. To change the time zone, select a time zone in the field . Use the and buttons to change the time zone.
6. Confirm your entry by selecting .
4.6.12.3 Selecting the Display Format
1. Select .
2. Select .
3. Select the date format.
4. Select the hour format.
5. Select the number format.
6. Confirm your entry by selecting .
4.6.12.4 Setting the Brightness
1. Select .
2. Select .
3. Set the display brightness. Select for a darker screen or for a lighter screen.
4. Confirm your entry by selecting .
4.6.13 Changing the System Settings via the User Interface
4.6.13.1 Selecting the Language
You can also set the language of the user interface via the XML file custom.xml (see Section4.6.14, page47).
Procedure:
1. Log into the user interface (see Section9.4.1, page78).
2. Select SunnyCentral > Settings > System.
3. Select the desired language in the field Language.
4. Select the button [Save].
5. To log off from the user interface, select the button [Logout].