9
PSC mechanical cooking end programmer
Allows programming interruption of cooking for a certain amount of time (maximum 2
hours).
Programmed functioning: turn the knob clockwise and select the desired cooking time.
When time is up, the oven will automatically turn off and an acoustic signal will mark the end
of cooking.
Manual functioning: to use the oven in a traditional manner without any programming, turn
the knob anti-clockwise to the symbol
Analogue cooking end programming clock
Allows a cooking end to be programmed (maximum 3 hours) in the same mode as the PSC
by turning the small knob always clockwise.
Adjusting the time:pull the knob lightly and turn it clockwise until the clock is set at the
current time.
Manual operation: Turn the knob clockwise until the hand reaches the manual symbol.
ATTENTION: The oven cannot work if the programmer is at O.
To Next Page
Loading...