14
TOUCH CONTROL OKD INSTRUCTIONS
This programmer functions with touch system, operate on the commands by exerting slight
pressure in the area indicated by the symbols.
Oven switch-on/off
To switch the oven on or off, lightly press and hold on the symbol for approx. one second.
The actual time will appear on the display. This can be performed independently from
whether the child safety function is activated or not .
Time adjustment
At the time of the first connection of the current, the flashing numbers 0:00 appear on the
display. The oven cannot be used without having
adjusted the time. To adjust the time, operate on the + and -- symbols. The time is fixed after
approx. 7 seconds when there is no intervention.
In the event of a temporary power cut, the data memorised remain set for approx. 45
seconds. To modify the time set, press the + and – symbols simultaneously until the numbers
start to flash. If the time is to be read in 12 hour am/pm mode, press + and --
simultaneously for 5 seconds.
Selecting programs
By pressing the symbols the oven functions menu can be scrolled.
The current function will flash for a few seconds and the set temperature assigned to the
function will appear (some functions do not envision adjustment of the temperatures). The
symbol and the flashing PAUSE wording indicate that the oven is ready to start in the
mode selected, but cooking has not yet begun.
Modification of the temperature assigned to the function
To modify the temperatures defined for each function, just touch the symbol and operate
on + and -- adjusting the temperature. After a few seconds, the new value is fixed and stops
flashing. Press to resume cooking. To go back to the pre-set temperature, operate in the
same way.
To change the temperature set by the manufacturer definitively, press on the symbol
until a warning beep is heard (approx. 5 seconds) and the temperature numbers stop
flashing.
Manual operation
Once the function has been selected, by operating on , cooking starts with the
temperature set indicated on the display. The PAUSE symbol disappears and the timer starts,
which indicates the time passed from the start of cooking. This will continue until interrupted
To Next Page
Loading...