13
Automatic operation (deferred cooking start setting)
Operate on the SEL symbol until the appearance of flashing . , set the desired cooking
time (using + -). Still using SEL go to the flashing symbol . and set the desired cooking end
time.
After a few seconds, the symbol switches off, the clock time re-appears and the Auto symbol
switches on. Turn the knobs onto the desired functions and temperatures. The oven remains
off and will turn on automatically according to what you set.
When the set time is reached, the acoustic signal indicates the end of cooking, the Man
symbol starts to flash and the oven turns off. Turn the knobs to the off position. To stop the
acoustic signal, touch any of the symbols. Press SEL again to exit programming.
Programming can be annulled by taking the cooking time to 0:00
Timer function
Operate on the SEL symbol until the flashing symbol, the numbers 0:00 and the min:sec
symbols appear. By touching the symbols, the desired time is set. The programmer will start
the countdown. On reaching the time set, the acoustic signal is triggered. Touch any symbol
indifferently to stop the acoustic signal. To annul this function, take the timer to 0:00. This
function can be used for manual cooking.
Acoustic signal
To stop the acoustic signal, touch one of the three boxed symbols..... SEL . It is possible to
adjust the volume of the signal to three levels, as follows. Operate on the SEL symbol until
the letter L appears, followed by the level currently set (from L1 to L3). Touch the symbols
to set the desired level
Child safety or accidental contacts
It is a function that can block access to the functionality of the electronic programmer keys
both when the oven is running and when the oven is off.
When, by operating for approx. 5 seconds on the symbol this function activates, (the
symbol lights up), this prevents children or other persons from pressing the programmer keys
and modifying the previous program or from starting the oven that is off. Operate in the same
way to deactivate it. In manual position (Man), activation of the lock does not allow use of the
oven. Consequently, with the timer function, the lock cannot be activated.
NOTE: the lock must be deactivated for access to a set program.
This remains active even after a power cut, which switches the programmer off.
To Next Page
Loading...