11
To annul the program before the end, press the knob for 3 seconds; the program will be
annulled and the timer goes back to manual cooking mode.
Minute minder programming
Programming the Minute Minder allows an alarm at the end of a programmed time without
activating cooking. To program an "alarm" without starting cooking, press the knob briefly 3
times until the "ALARM" icon flashes. Turn the knob and the setting of the Minute Minder is
identical to that of the Cooking End time.
The Minute Minder can only be used when there is no program in progress.
Signalling and blackout
The timer signals every power cut by the flashing "CLOCK" symbol. In this case, press the
knob briefly to disable the signal.
To Next Page
Loading...