To Next PageTo Next Page
Need help?Do you have a question about the Smart I Duo and is the answer not in the manual?
General| G-Sensor | Yes |
|---|---|
| Loop Recording | Yes |
| Night Vision | Yes |
| Field of View | 140° |
| Storage | MicroSD card up to 128GB |
Highlights key features like HD video, wide-angle lens, and night vision capabilities.
Lists all components included with the Smart-i Duo device.
Explains how to connect and position the additional rear view camera.
Describes how the device automatically starts recording when the engine is turned on.
Explains how to manually start and stop video recording.
Details how to switch to and use the camera for taking still photos.
Explains the movement detection feature for recording based on motion.
How to adjust screen orientation for optimal viewing.
Explains the G-Sensor's function in detecting collisions and locking footage.
Describes how to manually lock video files to prevent overwriting.
Guides on setting the device's date and time for accurate record keeping.
How to control audio recording status with a single button.
Instructions for connecting the device to a PC for data transfer.
How to review recorded videos and images on the device.
Settings related to video recording, including resolution and clip length.
Options for adjusting image capture parameters.
Covers various device settings like brightness, color, and audio.
Controls the camera's exposure level for better light capture.
Applies various color effects to images and video.
Enables automatic recording when motion is detected.
Option to display date and time on recorded footage.
Controls whether audio is recorded along with video.
Configures the device to start recording automatically upon powering up or charging.
Allows selection of the user interface language.
Sets the video frequency (50Hz or 60Hz) for compatibility.
Controls the Infrared (IR) LEDs for night vision.
Sets a delay before the device powers off after being switched off.
Enables or disables the sound made when pressing buttons.
Manages when the screen display automatically turns off to save power.
Adjusts the sensitivity of the G-sensor for impact detection.
Selects the video output format (PAL/NTSC) for external monitors.
Allows manual setting of the date and time.
Formats the Micro SD card, erasing all data.
Displays current firmware version and system details.
Resets all device settings to their original factory defaults.
